112.5mm Unilin Safe-R SR/TB-MF (100mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price
112.5mm Unilin Safe-R SR/TB-MF (100mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Guide Price: £532.83 (£639.40 inc VAT)
Price per m2: £46.25/m2 (£55.50 inc VAT)
- Product Code: A1-4889
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model: 2400x1200 - 11.52m2
Our ratings on 08-11-2024:
4.8 out of 5
112.5mm Unilin Safe-R SR/TB-MF (100mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 4)
Length: 2400mm
Width: 1200mm
Thickness: 112.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 4.8m2K/W
112.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 100mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 112.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 34.56m2
Delivery Time: 2 - 3 working days
37.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 25mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining i..
Guide Price: £665.07
£798.08 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 8.64m2
Delivery Time: 2 - 3 working days
120mm Unilin Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of an Euroclass D s1 d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/UF is faced with low emissivity aluminium facings bot..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
100mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced P..
Brand: Unilin (prev. Xtratherm)
Model: 1250x600mm - 6m2
Delivery Time: 2 - 3 working days
50mm Unilin XPS 500 is an extremely durable heavy duty thermal insulation board made of extruded polystyrene offering exceptional thermal performance and versatility. It is a lightweight board that is able to withstand extreme loads. It has a rebated edge.CHARACTERISTICSExtremely strong,Compressive ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
140mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the hig..
Guide Price: £49.95
£59.94 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 20.16m2
Delivery Time: 2 - 3 working days
52.5mm Unilin Safe-R SR/TB is a composite insulated panel of of 40mm Unilin Phenolic core with a glass tissue facing, bonded to a 12.5mm tapered edge plasterboard for internal applications. Unilin Safe-R SR/TB composite insulation board is fixed with dot & dab adhesive bonding. It is designed to..
Guide Price: £453.75
£544.50 inc VAT