20mm JCW Fire Rated Luminaire Cover 600x600mm
Guide Price
20mm JCW Fire Rated Luminaire Cover 600x600mm
Guide Price: £65.21 (£78.25 inc VAT)
- Product Code: A1-1994
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 600x600mm
Our ratings on 08-11-2024:
4.8 out of 5
20mm JCW Fire Rated Luminaire Cover 600x600mm
Width: 600mm
Length: 600mm
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots to reduce any potential for heat build up in the light fitting. In a fire situation the covers intumescent materials expand to fill all the slots with a fire resistant highly insulating char, preventing the fire from penetrating the ceiling. The cover also gives additional insulation protection to the ceiling void and reduces the chance of ignition of accumulated dust and insulation. The cover is unaffected by moisture and is non toxic. With the cover in place the modular light fitting can be installed in the normal way.
- Designed for ease of fitting,
- Self locating and cannot be fitted incorrectly,
- Unaffected by moisture and non-toxic,
- With cover in place, light fitting can be installed in normal way,
- Can be fitted from above or below ceiling,
- No screws or drilling required,
- 60 minutes fire tested to BS 476: Part 23,
- Maintains the ceilings fire performance.
- Carefully remove the assembled JCW Fire Rated Luminaire Cover from its packaging.
- Pass the cover diagonally through the ceiling aperture. If it will not pass through the opening it may be necessary to remove one or more of the ceiling struts.
- Ensure that the slots of the JCW Fire Rated Luminaire Cover are positioned over the ceiling grid and that the cover lies flush with the ceiling tiles.
- Push the cables through the pre-made holes, seal cables with intumescent mastic and then continue to fit the module in the normal way.
- Transformers should be sited outside of the cover.
- Ceiling accessories should be fitted in accordance with the ceiling manufacturers recommendations.
Has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW Luminaire-Covers.pdf
Guide Price
Brand: JCW
Model: JCW Acoustic Sealant
Delivery Time: 2 - 3 working days
JCW Acoustic Sealant is a high strength, permanently flexible white acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard. It is ideal for sealing the edges of plasterboard systems and filling and sealing any holes where services have been installed, thereby..
Guide Price: £4.50
£5.40 inc VAT
Guide Price
Brand: JCW
Model: JCW Cradle Pad
Delivery Time: 2 - 3 working days
10mm JCW Acoustic Cradle Rubber Pad is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300mm. A unique levelling syst..
Guide Price: £76.88
£92.26 inc VAT
Guide Price
Brand: JCW
Model: 1.05x10m - 10.50m2
Delivery Time: 2 - 3 working days
4.5mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 4.5mm when fully bonded to the sub-floor meets the Buil..
Guide Price: £114.11
£136.93 inc VAT
Guide Price
Brand: JCW
Model: 50x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 50C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 40mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 50C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £6.43
£7.72 inc VAT
Guide Price
Brand: JCW
Model: 300x170mm
Delivery Time: 2 - 3 working days
300x170mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.CHARACTERISTICSPractical: The downlighter covers allow light fittings to operate without overheating.Resistant: the fire rating ..
Guide Price: £58.90
£70.68 inc VAT
Guide Price
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 7 - 10 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £17.05
£20.46 inc VAT