255mm Ancon Teplo-BFL-5 Wall Tie for 176 - 200mm Cavity
255mm Ancon Teplo-BFL-5 Wall Tie for 176 - 200mm Cavity
Price: £2.43 (£2.92 inc VAT)
- Product Code: A1-5290
- Delivery Time: 1-3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 255mm - BFL-5
Our ratings on 08-11-2024:
4.8 out of 5
This product has a minimum quantity of 50. If you need less - request a quote.
Show other lengths
Ancon-Teplo-BFL-Tie-Datasheet.pdf
Brand: Ancon
Model: CFS115
Delivery Time: 2 - 5 working days
Ancon CFS115 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£56.19
£67.43 inc VAT
Brand: Ancon
Model: 175mm
Delivery Time: 2 - 3 working days
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model: CFS120
Delivery Time: 2 - 5 working days
Ancon CFS120 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model: 300mm
Delivery Time: 2 - 3 working days
300mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..