Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 08-11-2024:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model: 99 FC 50 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 99 FC 50 Fixing Channel has a very wide application, but especially compatible for cross-bracing in medium weight fittings in twin frame wall systems, in accordance to BS 5234.The channel can be used in variety of different systems, including:FireWall provides up to..
£122.89
£147.47 inc VAT
Brand: British Gypsum
Model: 148 EDC 80 - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 148 EDC 80 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and ..
£42.23
£50.68 inc VAT
Brand: British Gypsum
Model: GFS1 - 2.4 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GFS1 Fixing Strap is one of the Gypframe board joining components designed to provide support to horizontal plasterboard joints, within deflection heads, in case the wall is higher than one board. The product can be used in various systems including:FireWall provides up ..
£7.17
£8.60 inc VAT
Brand: British Gypsum
Model: 70 S 50 'C' Stud - 2.4 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 70 S 50 2.4 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to ..
£7.26
£8.71 inc VAT
Brand: British Gypsum
Model: PIR - 53mm
Delivery Time: 1 - 5 working days
53mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 40.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£110.62
£132.74 inc VAT
Brand: British Gypsum
Model: GA6 - 2.4 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GA6 2.4 m Splayed Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in vari..
£120.95
£145.14 inc VAT