32mm JCW Acoustic Soundboard 32 Plus - Cement Particle based Acoustic Overlay Board
Guide Price
32mm JCW Acoustic Soundboard 32 Plus - Cement Particle based Acoustic Overlay Board
Guide Price: £47.62 (£57.14 inc VAT)
To add to cart change quantity to minimum of 30. If you need less, ask for a price or add to a quote list.
100 or more £43.29 (£51.95 inc VAT)
150 or more £39.68 (£47.62 inc VAT)
200 or more £36.63 (£43.96 inc VAT)
- Product Code: A1-4343
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 1200x600mm - 0.72m2
- Weight: 21.77kg
Our ratings on 08-11-2024:
4.8 out of 5
32mm JCW Acoustic Soundboard 32 Plus - Cement Particle based Acoustic Overlay Board
Width: 600mm
Length: 1200mm
Board Coverage: 0.72m2
Density: 945kg/m3
Weight/m2: 30.24kg
Weight: 21.77kg
32mm JCW Acoustic Soundboard 32 Plus is an enhanced performance cement particle based acoustic overlay board for timber floors. It is designed for use as a floating overlay floor supported on decking. Soundboard 32 Plus is a durable and hardwearing acoustic decking solution. Soundboard 32 Plus is produced combining an 22mm tongue and grooved cement particle board which is laminated to a 10mm acoustic resilient layer.
CHARACTERISTICS
- Ideal for refurbishments where floor height is an issue,
- Cement particle board ready for final floor installation,
- Economical and easy to fit,
- High performance impact and airborne sound reduction,
- Hard Wearing and Durable,
- Suitable for new builds with conventional timber joists, I-joists and metal web joists.
- Suitable for conversion projects,
- Suitable for underfloor heating
APPLICATION
- New build
- Refurbishments
- Domestic upgrade
- On timber floors
INSTALLATION
- JCW Acoustic Soundboard 32 Plus boards are best laid towards the end of the project to protect from general trades, high floor loading and moisture leading to expansion.
- The boards are laid as a floating floor, without any mechanical fixings into the sub-floor. They are glued together as they are laid.
- Ensure that the floor surface is flat, dry, and free from all debris.
- Ensure that the wall surfaces are prepared - plaster skimmed or plaster boarded down to the level of the sub-deck and that there are no gaps at wall edges.
- Apply 5mm foam flat wall JCW Perimeter Edging Strip or L shaped strips to the base of all perimeter walls allowing approximately 15mm excess foam above the finished acoustic board height. This can later be folded down on top of the acoustic floor surface to isolate the skirting boards.
- Remove any tongues at the wall edges, then cut & scribe the first corner board into place and butt up to the Edging Strip. Do not compress the JCW Perimeter Edging Strip.
- Ensure all T&G board joints must be fully adhesive bonded using a recommended adhesive.
- Proceed with the second and successive rows ensuring that all board joints are staggered. The last row of boards will require accurate cutting & scribing to butt up to the wall.
- Any minor gaps between the JCW Perimeter Edging Strip and the acoustic board must be filled with JCW Acoustic Sealant/Mastic.
- It is imperative that the JCW Perimeter Edging Strip is not compressed in order to maintain acoustic isolation and an allowance for expansion.
- At the door threshold leave a 5mm gap between the adjoining acoustic boards and fill with JCW Acoustic Sealant. If the sub-floor at the doorways is not flat, the acoustic boards may require additional base support to reduce compressive joint movement. Additionally the surface joints could be sanded up to 5mm to level if required.
- The finished floor should not be walked on for a period of up to 24 hours to allow the adhesive to cure undisturbed.
- Ensure that the board joint adhesive has fully cured prior to overlaying any final floor covering.
CERTIFICATION
JCW Acoustic Soundboard 28 Plus board has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW-Acoustic-SoundBoard-Premium-21.pdf
Guide Price
Brand: JCW
Model: 80x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an..
Guide Price: £6.97
£8.36 inc VAT
Guide Price
Brand: JCW
Model: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £48.73
£58.48 inc VAT
Guide Price
Brand: JCW
Model: Double x 47mm deep
Delivery Time: 2 - 3 working days
Double x 47mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.61
£5.53 inc VAT
Guide Price
Brand: JCW
Model: 50mm-Free delivery
Delivery Time: 2 - 3 working days
50mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufac..
Guide Price: £23.26
£27.91 inc VAT
Guide Price
Brand: JCW
Model: 1200x1200mm - 1.44m2
Delivery Time: 2 - 3 working days
32.5mm JCW Silent Board Plus is an enhanced acoustic wall liner manufactured by laminating a 20mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flank..
Guide Price: £74.68
£89.62 inc VAT
Guide Price
Brand: JCW
Model: 80x42x1800mm
Delivery Time: 5 - 7 days
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £6.97
£8.36 inc VAT