38mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
38mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1616
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model: 600x2400mm - 1.44m2
- Weight: 18.14kg
Our ratings on 08-11-2024:
4.8 out of 5
38mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 477.5kg/m3
Weight/m2: 12.6kg
Weight: 18.14kg
Thermal Conductivity: 0.033W/mK
R-Value: 1.15m2K/W
Compressive Strength: 250kPa
38mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model: 1m x 10m - 10m2
Delivery Time: 3 - 5 days
5mm Cellecta Rubberfon Ultratop Acoustic Roll is a made from recycled rubber and cork content and has excellent sound proofing and noise reduction acoustic performance. It has high compressive strength and is suitable for all floor finishes including ceramic tiles, vinyl, wood and laminate..
Brand: Cellecta
Model: 10mm x 120mm - 50m
Delivery Time: 3 - 5 days
10mm x 120mm Cellecta Yelofon ES10 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATI..
Brand: Cellecta
Model: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
106mm Cellecta Hexatherm XCPL is a high performance extruded polystyrene thermal insulation board bonded to an high impact thermal laminate facing, suitable for car parks and soffits. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite th..
Brand: Cellecta
Model: 3mm
Delivery Time: 3 - 5 days
3mm Cellecta Rubberfon Packers is a part of a lightweight and extremely accurate levelling system that enables contractors to get the floors to within the nearest millimetre. It is a simple way to achieve high levels of acoustic insulation to meet Part E in concrete floors, while providing acceptabl..
Brand: Cellecta
Model: 125mm - 2.5m
Delivery Time: 3 - 5 days
125mm Cellecta Unicloser X Double Flange Cavity Closer made of Hexatherm extruded polystyrene with two U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,2 ..
Brand: Cellecta
Model: 10mm x 150mm - 50m
Delivery Time: 3 - 5 days
10mm x 150mm Cellecta Yelofon ES10 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATI..