3mm JCW Acoustic Barrier Mat
Guide Price
3mm JCW Acoustic Barrier Mat
Guide Price: £76.15 (£91.38 inc VAT)
Price per m2: £15.86/m2 (£19.04 inc VAT)
To add to cart change quantity to minimum of 10. If you need less, ask for a price or add to a quote list.
15 or more £72.35 (£86.82 inc VAT)
20 or more £69.82 (£83.78 inc VAT)
- Product Code: A1-1959
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 1200x4000mm - 4.80m2
- Weight: 36.00kg
Our ratings on 08-11-2024:
4.8 out of 5
3mm JCW Acoustic Barrier Mat
Width: 1200mm
Roll Coverage: 4.8m2
Density: 2500kg/m3
Weight/m2: 7.5kg
Weight: 36kg
3mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are floors, walls & ceilings.
- Very quick and simple to install,
- Noticeable improvements will be gained when bonding barrier matting between two layers of Plasterboard on walls & ceilings or pinning on to stud work or joists prior to plasterboard fixing,
- Noticeable airborne improvement gain with minimal height loss when 2 barrier matting layers are laid on the floor in opposite directions,
- Ideal as a separating curtain wall between offices above walls,
- Perfect product for dampening steelwork, ducting and machinery casings etc,
- Can be loose laid,
- Can be partially or fully bonded to the sub-floor.
- New build
- Refurbishments
- Domestic upgrade
- On floors, walls & ceilings.
Floors CERTIFICATION
- Cut the first row of matting continuously across the room up to the wall edges and if possible beneath the skirting boards if fitted.
- The second and subsequent rows should either be tightly butt edged or overlapped by 25mm to ensure optimum airborne performance.
- As JCW Barrier Matting is an impervious product the best adhesive to use for an instant bond is either a Spray Contact Adhesive for partial bond or trowel/spreader applied Contact Adhesive if full bonding is required.
- Contact adhesive should be spread immediately once applied to the JCW Barrier Matting.
- The JCW Barrier Matting can be installed in continuous vertical lengths with vertical joints centrally between the studs or metal work.
- Cut the first vertical length and secure centrally between the studs or metal work using a few Clout Nails.
- Then fix the plasterboard/s over ensuring all plasterboard joints and/or minor gaps are sealed with JCW Acoustic Sealant/Mastic.
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
18mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland ..
Guide Price: £37.81
£45.37 inc VAT
Brand: JCW
Model: JCW Cradle Packer
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Cradle Packer also called a 2mm Packing Shims is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300..
Guide Price: £16.91
£20.29 inc VAT
Brand: JCW
Model: 1200x1200mm - 1.44m2
Delivery Time: 2 - 3 working days
32.5mm JCW Silent Board Plus is an enhanced acoustic wall liner manufactured by laminating a 20mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flank..
Guide Price: £74.68
£89.62 inc VAT
Brand: JCW
Model: 1200x1200mm - 1.44m2
Delivery Time: 2 - 3 working days
27.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 15mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flan..
Guide Price: £57.27
£68.72 inc VAT
Brand: JCW
Model: 1000x30mm
Delivery Time: 2 - 3 working days
6mm JCW Impactalay Gripper Strip is an easy fitting device to prevent Impactlay plus from sliding and bunching. The JCW Impactalay plus must be installed alongside rubber JCW Perimeter Strips. It can be used on concrete, timber sub floors and stairs. Easily cut to size and simple to fit Provides a n..
Guide Price: £1.68
£2.02 inc VAT
Brand: JCW
Model: 250x250mm
Delivery Time: 2 - 3 working days
250x250mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.CHARACTERISTICSPractical: The downlighter covers allow light fittings to operate without overheating.Resistant: the fire rating ..
Guide Price: £27.78
£33.34 inc VAT