50mm Perforated Full System Base Bead
Guide Price
50mm Perforated Full System Base Bead
Guide Price: £18.72 (£22.46 inc VAT)
2 or more £18.34 (£22.01 inc VAT)
3 or more £18.14 (£21.77 inc VAT)
4 or more £17.95 (£21.54 inc VAT)
5 or more £17.78 (£21.34 inc VAT)
- Product Code: A1-2309
- Delivery Time: 1 - 2 days
- Brand: Wemico
- Model: WE65N
Our ratings on 08-11-2024:
4.8 out of 5
50mm Perforated Full System Base Bead
Width: 50mm
Length: 3000mm
dim 'A': 10mm
50mm Perforated Full System Base Bead Profile made from powder coated galvanised steel with PVC nosing which will provide additional protection against abrasion and corrosion. This product can also be used as a window/door head profile. External and Internal Corners and additional sizes made to order.
Note: This profile can be supplied in Galvanised Steel and in Stainless Steel.
PVC Nose available in White, Brown, Oatmeal, Grey or Terracotta. Please specify colour during checkout.
Choose bead width by adding "dim A" to the insulation thickness, for example as shown in the picture below for 40mm thick insulation.
Guide Price
Brand: Wemico
Model: WEC 732 - 60mm
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £27.59
£33.11 inc VAT
Guide Price
Brand: Wemico
Model: WEC 771OT
Delivery Time: 1 - 2 days
120mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactu..
Guide Price: £24.82
£29.78 inc VAT
Brand: Wemico
Model: 9460
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9460 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Guide Price
Brand: Wemico
Model: Verge Trim End Cap - 110mm
Delivery Time: 1 - 2 days
110mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model: WEC 781 - 70mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appe..
Guide Price: £27.00
£32.40 inc VAT
Guide Price
Brand: Wemico
Model: WEC 781 - 50mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appe..
Guide Price: £27.00
£32.40 inc VAT