540mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 400mm Cavity
540mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 400mm Cavity
- Product Code: A1-5403
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 540mm
Our ratings on 08-11-2024:
4.8 out of 5
540mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 400mm Cavity
Length: 540mm
Pack Quantity: 1
Cavity width: 400mm
540mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall tie that can be resin-fixed in remedial and retrofit applications. This tie has a thermal conductivity of only 0.7 W/mK. Requires Ø10mm hole. A stainless steel sieve may be used to retain resin and is particularly useful in perforated brick or hollow blockwork. A 12mm hole is required to fit the sieve.
CHARACTERISTICS
- Manufactured from basalt fibres set in a resin matrix,
- 7mm diameter,
- Suitable for 400mm cavity.
Brand: Ancon
Model: 275mm
Delivery Time: 2 - 3 working days
275mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£6.04
£7.25 inc VAT
Brand: Ancon
Model: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£22.98
£27.58 inc VAT
Brand: Ancon
Model: 179mm
Delivery Time: 1-3 working days
179mm Ancon Staifix Timber Frame Tie is a cranked tie used to fix brickwork or blockwork to timber-framed structures up to 4 storeys in height. It is a type 6 tie that has been independently tested for use with 15mm OSB SIPS (structural insulated panel) panel. It is supplied with an annular rin..
£121.43
£145.72 inc VAT
Brand: Ancon
Model: CFS100
Delivery Time: 2 - 5 working days
Ancon CFS100 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the cha..
Brand: Ancon
Model: 230mm - BFL-5
Delivery Time: 1-3 working days
230mm Ancon Teplo-BFL-5 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
£2.37
£2.84 inc VAT