87.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (75mm PIR Insulation bonded to 12.5mm Plasterboard)
87.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (75mm PIR Insulation bonded to 12.5mm Plasterboard)
- Product Code: A1-2266
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 1200x2400 - 2.88m2
- Weight: 30.90kg
Due to nationwide shortage of PIR insulation lead time may be longer for this product.
Our ratings on 08-11-2024:
4.8 out of 5
87.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (75mm PIR Insulation bonded to 12.5mm Plasterboard)
Width: 1200mm
Length: 2400mm
Density: 122.6kg/m3
Weight/m2: 10.73kg
Weight: 30.9kg
Thermal Conductivity: 0.022W/mK
R-Value: 3.41m2K/W
Compressive Strength: 140kPa
Board Coverage: 2.88m2
87.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 75mm Xtratherm Polyiso (PIR) core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one operation for suitable masonry walls, sloped rafters and ceilings in new build and refurbishment situations. XT/TL-MF is only suitable for mechanical fixed applications.
Manufactured to strict EN 13165 standards, the closed cell structure and gas tight facings provides excellent thermal performance and moisture resistance. Xtratherm Thin-R products deliver genuine thermally robust performances and are supported with full third party assurances throughout the range.
CHARACTERISTICS
- High Thermal Performance
- Certified Thermal Conductivity as low as 0.022W/mK
- 12.5mm tapered edge plasterboard. (You can also order square edge plasterboard.)
- Integral Vapour Control Layer
- Low Emissivity Foil Facings
- Energy Saving Trust Approved Product
- HCFC/CFC Free, GWP <5
- BRE Green Guide A+ Rated
- Non-deleterious material
- Closed cell structure – moisture resistant
- Easy to Install
APPLICATION
- Masonry walls
- Sloped rafters
- Ceilings
INSTALLATION
- Mechanical Fixing XT/TL-MF Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the XT/TL-MF Thermal Liner into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge. The fixings (thermally broken) should penetrate at least 25mm into the batten.
- Installation must be in accordance with good dry lining practice. BS 8212:1988 should be considered, careful setting out and planning is essential, fill any gaps with foam filler.
CERTIFICATION
- This product is manufactured in accordance with BS/IS EN 13165:2008
- BS EN ISO 9001 Quality Management Systems
- BS EN ISO 14001 Environmental Management Systems
- BS OHSAS 18001 Health & Safety Management Systems
- Energy Savings Trust Recommended Product
Xtratherm Thin-R-XT-TL-MF.pdf
Brand: Xtratherm
Model: 2400x1200mm - 2.88m2
Delivery Time: 2 - 3 working days
56mm Xtratherm Safe-R SR/CW Phenolic Soffit Plus Board (50mm Phenolic + 6mm Building Panel) is a foam board is a superior performance ceiling insulation board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/STP phenolic core is ..
Brand: Xtratherm
Model: 2400x1200mm - 2.88m2
Delivery Time: 2 - 3 working days
106mm Xtratherm Safe-R SR/CW Phenolic Soffit Plus Board (100mm Phenolic + 6mm Building Panel) is a foam board is a superior performance ceiling insulation board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/STP phenolic core i..
Guide Price
Brand: Xtratherm
Model: 1200x450mm - 2.16m2
Delivery Time: 2 - 4 days
Xtratherm ThinR XT/CW Partial Fill Cavity Wall Insulation is the best solution when designers or regulations demand additional thermal insulation in external masonry walls, without a substantial increase in the width of the cavity. Xtratherm Thin-R boards achieve high standards of insulation wh..
Guide Price: £35.47
£42.56 inc VAT
Brand: Xtratherm
Model: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performa..
Guide Price
Brand: Xtratherm
Model: 2400x1200mm - 11.52m2
Delivery Time: 2 - 3 working days
80mm Xtratherm Safe-R is a high-performance rigid insulation designed for enhanced fire resistance. It features a Class O phenolic foam core with minimal smoke obscuration, encased between low emissivity aluminum facings on both sides. With an impressive thermal conductivity as low as 0.021W/mK, Saf..
Guide Price: £317.36
£380.83 inc VAT
Brand: Xtratherm
Model: 2400x1200 - 2.88m2
Delivery Time: 1-3 working days
56mm Xtratherm FR/TP Ply is a composite insulated panel of 50mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 6mm WBP grade plywood board. Xtratherm FR/TP Ply is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat ..