British Gypsum Thistle GypPrime Suction Control Primer - 11 Litres

Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.

• Lengthens the working time of plasters on very high suction backgrounds by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out,
• Yellow in colour - easy to avoid missing any areas,
• Can be diluted - normally 1 part to 5 parts water provides adequate suction control, or can be used neat if necessary to control extremely severe suction,
• One tub covers up to 600 sq.m (diluted 1:5) or 100 sq.m undiluted,
• Easily applied by suitable roller, brush or spray Large container allows application directly from the tub,

• High suction areas,
• Very dry backgrounds
  

• ISO 9001 Quality Management,
• ISO 14001 Environmental Management,
• OHSAS 18001 Occupational Health and Safety Management,
• ISO 50001 Energy Management