Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Price: £12.71 (£15.25 inc VAT)
Price per m2: £1.27/m2 (£1.53 inc VAT)
10 or more £12.46 (£14.95 inc VAT)
15 or more £12.29 (£14.75 inc VAT)
20 or more £12.09 (£14.51 inc VAT)
- Product Code: A1-637
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model: CT84
Our ratings on 08-11-2024:
4.8 out of 5
Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Coverage: 10m2
Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the reinforced with fibreglass mesh base coat layer may be applied using Ceresit ZU or CT 87. Ceresit CT 84 is also used for fixing such materials as EPS and XPS boards and hard mineral wool to all different surfaces such as wood, OSB boards, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete.
CHARACTERISTICS
- Coverage: 10m2 - 100% more than traditional cement adhesives
- 15% higher adhesive strength than traditional cement adhesives
- Low pressure
- Application from 0C and at high humidity
- Perfect for "warming to warming" system
- Enhanced thermal insulation properties
- High homogeneity of adhesive thanks to metal ball protecting against too large air bubbles
APPLICATION
- External walls insulation systems
- Drylining
CERTIFICATION
The product has the following reference document:- The Technical Approval in the system
- Certificate ITB-0173/Z
- The Technical Approval of the Building Research Instituteno AT-15-8372/2010 and the National Declaration ofConformity No CT 84/1/10 of 25.05.2010
Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems
Ceresit-CT84-Express-Datasheet.pdf
Guide Price
Brand: Ceresit
Model: CT80 - 25kg
Delivery Time: 7 - 10 days
Ceresit CT80 is an adhesive mortar for fastening EWI mineral wool slabs, polystyrene and phenolic boards and also for making a thin layer of base coat render reinforced with fibreglass mesh on the insulation in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load-bearing, dense and..
Guide Price: £15.20
£18.24 inc VAT
Guide Price
Brand: Ceresit
Model: CT49
Delivery Time: 2 - 3 working days
Ceresit CT49 Silix XD Nano-Silicone Reno Paint is a highly hydrophobic, vapour permeable exterior and interior paint formulated with advanced nano-silicone technology. Designed for use on a variety of building façades and interior surfaces, this paint offers exceptional durability, weather resistanc..
Guide Price: £132.00
£158.40 inc VAT
Brand: Ceresit
Model: CR166 - Bucket
Delivery Time: In Stock 1-2 working days
Ceresit CR166 is a high-performance, two-component flexible waterproofing slurry designed to provide a durable and reliable barrier against water ingress. Formulated with a unique blend of cementitious binders, polymers, and special additives, this waterproofing solution offers exceptional flexibili..
Guide Price
Brand: Ceresit
Model: CT74 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT79 Impactum Elastomeric Render is a high-performance, flexible, and breathable render that provides exceptional adhesion and durability for a wide range of substrates. This render is specifically designed for use in areas with high movement and vibration, making it an ideal sol..
Guide Price: £175.00
£210.00 inc VAT
Brand: Ceresit
Model: CT17 - 10 litres
Delivery Time: 5 - 7 days
Ceresit CT17 Profi is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. It is highly recommended for aerated concrete, anhy..
£37.53
£45.04 inc VAT
Brand: Ceresit
Model: CT84
Delivery Time: In Stock 1-2 working days
Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the ..
£12.71
£15.25 inc VAT