Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Price: £12.71 (£15.25 inc VAT)
Price per m2: £1.27/m2 (£1.53 inc VAT)
10 or more £12.46 (£14.95 inc VAT)
15 or more £12.29 (£14.75 inc VAT)
20 or more £12.09 (£14.51 inc VAT)
- Product Code: A1-637
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model: CT84
Our ratings on 08-11-2024:
4.8 out of 5
Ceresit CT84 Express - Foam Adhesive for Internal and External Wall Insulation Boards
Coverage: 10m2
Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the reinforced with fibreglass mesh base coat layer may be applied using Ceresit ZU or CT 87. Ceresit CT 84 is also used for fixing such materials as EPS and XPS boards and hard mineral wool to all different surfaces such as wood, OSB boards, bitumens, ceramic bricks, concrete, coated and galvanised sheet plate, dry cellular concrete.
CHARACTERISTICS
- Coverage: 10m2 - 100% more than traditional cement adhesives
- 15% higher adhesive strength than traditional cement adhesives
- Low pressure
- Application from 0C and at high humidity
- Perfect for "warming to warming" system
- Enhanced thermal insulation properties
- High homogeneity of adhesive thanks to metal ball protecting against too large air bubbles
APPLICATION
- External walls insulation systems
- Drylining
CERTIFICATION
The product has the following reference document:- The Technical Approval in the system
- Certificate ITB-0173/Z
- The Technical Approval of the Building Research Instituteno AT-15-8372/2010 and the National Declaration ofConformity No CT 84/1/10 of 25.05.2010
Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems
Ceresit-CT84-Express-Datasheet.pdf
Brand: Ceresit
Model: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-38 is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1,200 ° C, and for short periods even up to +1,500 ° C. It has very good adhesion to surfaces such as: concrete, cement mortars and plasters, bricks (also refractory),..
Brand: Ceresit
Model: CT17 - 10 litres
Delivery Time: 5 - 7 days
Ceresit CT17 Profi is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. It is highly recommended for aerated concrete, anhy..
£37.53
£45.04 inc VAT
Brand: Ceresit
Model: 870ml
Delivery Time: 1 - 2 days
Ceresit TS70 Mega is a high performance, one component low-pressure expanding polyurethane foam used for quick mounting of frames and for filling cavities, supplementing thermal and acoustic insulation. Ceresit TS 70 Mega foam is used for setting and sealing door and window frames, window sills, rol..
£9.80
£11.76 inc VAT
Brand: Ceresit
Model: Ceresit PU
Delivery Time: 5 - 7 days
Ceresit Profi cleaner is used for removing fresh foam spots and cleaning the applicator.Cleaning of the applicator is necessary if:difficulties have been experienced while using a gun gun has not been used for more than 1 monthafter removing the can from the gun without replacing it with a new ..
£10.59
£12.71 inc VAT
Brand: Ceresit
Model: 25kg
Delivery Time: 3 - 5 days
Ceresit CT85 Flex is a versatile, cementitious adhesive and base coat designed for use with expanded polystyrene (EPS) boards in external thermal insulation composite systems (ETICS). Formulated to provide exceptional adhesion and flexibility, this product plays a crucial role in the Ceresit Cerethe..
£20.31
£24.37 inc VAT
Brand: Ceresit
Model: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-28 is a one-component thermo resistant flexible silicone sealant, resistant to temperature fluctuations from -65 ° C to +260 ° C, and even up to +315 ° C for a short time. It has very good adhesion to non-porous surfaces such as: metal, glass, wood, silicone resin, vulcanized silicone rub..