110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
- Product Code: A1-4621
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 2400x1200mm - 8.64m2
- Weight: 30.41kg
Our ratings on 08-11-2024:
4.8 out of 5
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
Width: 1200mm
Length: 2400mm
Pack Coverage: 8.64m2
Pack Quantity: 3
Density: 32kg/m3
Weight/m2: 3.52kg
Weight: 30.41kg
Thermal Conductivity: 0.022W/mK
R-Value: 5m2K/W
Compressive Strength: 150kPa
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
BBA_certificate_Xtratherm_FR_ALU.pdf
Guide Price
Brand: Xtratherm
Model: 2400x1200 - 2.88m2
Delivery Time: 1-3 working days
Xtratherm Plydeck is a composite insulated panel consisting of an 110mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 9mm OSB board. This advanced panel offers both thermal insulation and decking capabilities in a single application.
Application
Xtratherm Plydec..
Guide Price: £65.54
£78.65 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 5.76m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 60mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the dec..
Guide Price: £86.31
£103.57 inc VAT
Guide Price
Brand: Xtratherm
Model: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
Xtratherm Thin-R is a foil-faced Polyisocyanurate (PIR) insulation board formed by a blowing process that generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-R superb insulating capability. ..
Guide Price: £23.10
£27.72 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
82.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 70mm Xtratherm Polyiso (PIR) core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in..
Guide Price: £81.53
£97.84 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x450mm - 3.78m2
Delivery Time: 2 - 4 days
Xtratherm ThinR XT/CW Partial Fill Cavity Wall Insulation is the best solution when designers or regulations demand additional thermal insulation in external masonry walls, without a substantial increase in the width of the cavity. Xtratherm Thin-R boards achieve high standards of insulation wh..
Guide Price: £43.17
£51.80 inc VAT
Brand: Xtratherm
Model: 2400x1200mm - 8.64m2
Delivery Time: 1-3 working days
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use be..