70mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
70mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
- Product Code: A1-4611
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model: 2400x1200mm - 11.52m2
- Weight: 25.80kg
Our ratings on 08-11-2024:
4.8 out of 5
70mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
Width: 1200mm
Length: 2400mm
Pack Coverage: 11.52m2
Pack Quantity: 4
Density: 32kg/m3
Weight/m2: 2.24kg
Weight: 25.8kg
Thermal Conductivity: 0.022W/mK
R-Value: 3.18m2K/W
Compressive Strength: 150kPa
70mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
Xtratherm_Flat_Roofing_guide.pdf
Guide Price
Brand: Xtratherm
Model: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
Xtratherm Thin-R is a foil-faced Polyisocyanurate (PIR) insulation board formed by a blowing process that generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-R superb insulating capability. ..
Guide Price: £23.10
£27.72 inc VAT
Brand: Xtratherm
Model: 2400x1200mm - 20.16m2
Delivery Time: 2 - 3 working days
40mm Xtratherm Safe-R SR/RS Phenolic foam is a superior performance rigid insulation rainscreen cladding board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/RS is faced with low emissivity aluminium facings both sides, and has..
Guide Price
Brand: Xtratherm
Model: 1200x600mm - 2.88m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 110mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £75.64
£90.77 inc VAT
Guide Price
Brand: Xtratherm
Model: 2400x1200mm - 11.52m2
Delivery Time: 7 - 10 days
100mm Xtratherm Safe-R is an advanced rigid insulation offering superior performance and enhanced fire resistance. It features a Class O phenolic foam core with minimal smoke obscuration. Safe-R is covered on both sides with low emissivity aluminum facings, boasting a remarkable thermal conductivity..
Guide Price: £385.28
£462.34 inc VAT
Guide Price
Brand: Xtratherm
Model: 1200x450mm - 4.86m2
Delivery Time: 2 - 4 days
Xtratherm ThinR XT/CW Partial Fill Cavity Wall Insulation is the best solution when designers or regulations demand additional thermal insulation in external masonry walls, without a substantial increase in the width of the cavity. Xtratherm Thin-R boards achieve high standards of insulation wh..
Guide Price: £76.47
£91.76 inc VAT
Brand: Xtratherm
Model: 1200x2400mm - 8.64m2
Delivery Time: 1-3 working days
125mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performa..