225mm Ancon AC 31 Wall Tie - Remedial Wall Tie
225mm Ancon AC 31 Wall Tie - Remedial Wall Tie
- Product Code: A1-5380
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 225mm
Our ratings on 08-11-2024:
4.8 out of 5
225mm Ancon AC 31 Wall Tie - Remedial Wall Tie
Length: 225mm
Pack Quantity: 1
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is supplied with a moveable neoprene o-ring that acts as a drip.
CHARACTERISTICS
- Masonry-to-masonry remedial wall tie,
- Supplied with a moveable neoprene o-ring that acts as a drip.
Brand: Ancon
Model: 265mm
Delivery Time: 2 - 3 working days
265mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£22.98
£27.58 inc VAT
Brand: Ancon
Model: CFS115
Delivery Time: 2 - 5 working days
Ancon CFS115 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon ST1 Wall Tie low conductivity heavy duty stainless steel wall tie that meets the performance requirement of Approved Document E for use in external masonry walls. The enhanced bond makes it ideal for use in slow drying lime mortars. Wall ties should be pressed down in fresh mortar. They ..
£100.41
£120.49 inc VAT
Brand: Ancon
Model: 100mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-100-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-100-2PT-W high thread screws accommodat..
Brand: Ancon
Model: 490mm
Delivery Time: 2 - 3 working days
490mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..