Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 08-11-2024:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model: 25kg
Delivery Time: Out Of Stock
Thistle Universal OneCoat is a gypsum-based plaster, suitable for hand or machine application to most internal backgrounds. It is characterized by its white appearance and good impact strength. It is gypsum hemihydrate formulated with special additives to control working and setting characteristics...
£809.30
£971.16 inc VAT
Brand: British Gypsum
Model: 146 TSC 90 - 6 m
Delivery Time: 3 - 4 days
British Gypsum Gypframe Shaftwall 146 TSC 90 6 m Tabbed Starter Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with..
£826.83
£992.20 inc VAT
Brand: British Gypsum
Model: 50 FEC 50 - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 50 FEC 50 Folded Edge Standard Floor & Ceiling Channel is the most commonly used product for securing wall studs in ceiling and floor junctions for partition heights of up to 4200mm. They are made using the UltraSteel process providing a more stabile a..
£86.07
£103.28 inc VAT
Brand: British Gypsum
Model: 72 EDC 80 - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 72 EDC 80 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and d..
£32.18
£38.62 inc VAT
Brand: British Gypsum
Model: PIR - 38mm
Delivery Time: 1 - 5 working days
38mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 25.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£99.92
£119.90 inc VAT
Guide Price
Brand: British Gypsum
Model: PIR - 78mm
Delivery Time: 1 - 5 working days
78mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 68.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
Guide Price: £161.45
£193.74 inc VAT