Menu
Menu
Your Cart

460mm Ancon Teplo-BFR Wall Tie for 325mm Cavity - Type 3 Tie

460mm Ancon Teplo-BFR Wall Tie for 325mm Cavity - Type 3 Tie

Length: 460mm
Cavity width: 325mm

460mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm diameter tie manufactured from basalt-fibres with a plain end for resin anchoring into an existing structure and a moulded safety end for building into a new bed joint.  

CHARACTERISTICS
  • Can be used on concrete, masonry walls
  • Low thermal conductivity wall tie,
  • Minimises heat loss across an insulated cavity,
  • Ideal for cavity wall construction where mortar joints do not align,
  • The free end can be chemically embedded in 10mm diameter hole.

Brand: Ancon Model: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon Model: CFS100
Delivery Time: 2 - 5 working days
Ancon CFS100 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the cha..
Brand: Ancon Model: 127mm
Delivery Time: 1-3 working days
127mm Ancon Staifix Timber Frame Tie is a cranked tie used to fix brickwork or blockwork to timber-framed structures up to 4 storeys in height. It is a type 6 tie that has been independently tested for use with 15mm OSB SIPS (structural insulated panel) panel. It is supplied with an annular rin..
£64.26
£77.11 inc VAT
Brand: Ancon Model: 430mm - BFL-7
Delivery Time: 1-3 working days
430mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon Model: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£56.19
£67.43 inc VAT
Brand: Ancon Model: 115mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-115-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-115-2PT-W high thread screws accommodat..
This product is listed in the following categories and systems (click to show).