52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Guide Price
52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Guide Price: £473.18 (£567.82 inc VAT)
Price per m2: £23.47/m2 (£28.17 inc VAT)
2 or more £457.91 (£549.49 inc VAT)
4 or more £442.55 (£531.06 inc VAT)
5 or more £427.28 (£512.74 inc VAT)
- Product Code: A1-4884
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model: 2400x1200 - 20.16m2
Our ratings on 08-11-2024:
4.8 out of 5
52.5mm Unilin Safe-R SR/TB-MF (40mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 7)
Length: 2400mm
Width: 1200mm
Thickness: 52.5mm
Pack Quantity: 7
Board Coverage: 2.88m2
Pack Coverage: 20.16m2
Thermal Conductivity: 0.023W/mK
R-Value: 1.8m2K/W
52.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 40mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 52.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
50mm Unilin Thin-r XT/TF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings for use in timber framed walls. Unilin XT/TF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/TF is CFC & HCFC free and is manuf..
Guide Price: £21.89
£26.27 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 600mm - 10.08m2
Delivery Time: 3 - 5 days
30mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £99.44
£119.33 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
80mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200x600mm - 12.96m2
Delivery Time: 3 - 5 days
25mm Unilin FR-BGM is a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. FR..
Guide Price: £129.93
£155.92 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 20.16m2
Delivery Time: 2 - 3 working days
52.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 40mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining i..
Guide Price: £473.18
£567.82 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 14.40m2
Delivery Time: 2 - 3 working days
72.5mm Unilin Safe-R SR/TB is a composite insulated panel of of 60mm Unilin Phenolic core with a glass tissue facing, bonded to a 12.5mm tapered edge plasterboard for internal applications. Unilin Safe-R SR/TB composite insulation board is fixed with dot & dab adhesive bonding. It is designed to..
Guide Price: £419.23
£503.08 inc VAT