9mm Isocheck Screedcheck Underscreed XL9 Impact Improvement Mat - 1.2m x 50m roll
9mm Isocheck Screedcheck Underscreed XL9 Impact Improvement Mat - 1.2m x 50m roll
- Product Code: A1-3291
- Delivery Time: 1 - 2 days
- Brand: Isomass (Tech. support: 08458383389)
- Model: 1.2m x 50m - 60m2
Our ratings on 08-11-2024:
4.8 out of 5
9mm Isocheck Screedcheck Underscreed XL9 Impact Improvement Mat - 1.2m x 50m roll
Width: 1200mm
Length: 50000mm
Roll Coverage: 60m2
9mm Isocheck Screedcheck Underscreed XL9 system is designed to be placed directly below the screed within a masonry structural floor to isolate the screed from the structural sub floor, and provides sufficient impact absorption. The Isocheck Underscreed XL9 system features a 9mm closed cell non-cross linked foam layer. When installed correctly, the Isocheck Underscreed XL9 system will enable compliance with Approved Document E 2003 and subsequent amendments in 2004, 2010, 2013 and 2015.
CHARACTERISTICS
- Underscored impact improvement mat,
- Easy to handle and install,
- Closed cells prevents water absorption,
- Excellent acoustic performance,
- High resistance to compression and creeping,
APPLICATION
- Designed to be placed directly below the screed within a masonry structural floor.
INSTALLATION
- The floor surface should be swept free of any loose debris that may damage or bridge the system.
- Isoocheck Screedcheck XL9 can be rolled up the wall or lapped and taped to a perimeter flanking strip.
- Either option should allow a minimum 50mm to protrude above the intended FFL of the screed.
- Adjoining roll edges should be butt-jointed jointed and sealed with a minimum 100mm wide jointing tape.
- Services that penetrate the screed should be isolated by wrapping with Underscreed which again would be taped.
- When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.
CERTIFICATION

Brand: Isomass
Model: 26mm - 8.5mm
Delivery Time: 2 - 3 working days
26mm Isocheck Isolation Washers used to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration.Diameter A = 26mmDiameter screw B = 8.5mm..
Brand: Isomass
Model: 27/54 - 75mm - 2m Free Delivery
Delivery Time: 1 - 2 days
75mm Isocheck Expandastrip 27/54 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impre..
Brand: Isomass
Model: 5/9 - 10mm - 4m Free Delivery
Delivery Time: 1 - 2 days
10mm Isocheck Expandastrip 5/9 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impregn..
Brand: Isomass
Model: 1.0x20m - 20m2
Delivery Time: 3 - 5 days
Isocheck Re-Mat Base 3 Acoustic Screed Underlay is an impact improvement under screed system, designed for reducing sound transmission and improving acoustic performance of concrete block and beam floors. The system is used in new build, refurbishment and conversion applications, able to meet t..
Brand: Isomass
Model: 2400x600mm - 1.44m2
Delivery Time: 3 - 5 days
Monodeck 26C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acoustic performance of concrete floors. The system is used in new build, refurbishment and conversions of concrete floors, able to meet the requirements of th..
Brand: Isomass
Model: 1.2m x 1m - 1.2m2
Delivery Time: 3 - 5 days
7mm Isocheck Isomat 7 is a 6mm layer of Isofiba bonded to performance enhancing barrier membrane to reduce sound transmission through timber floors. It can support chipboard, OSB, MDF or Plywood floors. It enables a timber floor to meet the sound transmission regulations of Approved Document E ..