24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price
24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price: £35.16 (£42.19 inc VAT)
Price per m2: £24.42/m2 (£29.30 inc VAT)
5 or more £34.59 (£41.51 inc VAT)
10 or more £34.01 (£40.81 inc VAT)
20 or more £33.16 (£39.79 inc VAT)
- Product Code: A1-1042
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model: 2400x600mm - 1.44m2
- Weight: 19.00kg
Our ratings on 08-11-2024:
4.8 out of 5
24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Width: 600mm
Length: 2400mm
Board Coverage: 1.44m2
Density: 550kg/m3
Weight/m2: 13.2kg
Weight: 19kg
24mm Isocheck 24T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 24T is used in new build, refurbishment and conversion applications, able to also reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004 and 2010). Isocheck 24T can be installed over underfloor heating systems. This board consists a 18mm P5 V313 moisture resistant chipboard bonded to 6mm thick recycled Isofiba.
CHARACTERISTICS
- Great acoustic properties,
- Reduces impact sound transmission in finished wooden floors,
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- Consists of a P5 V313 moisture-resistant chipboard and a 6mm thick recycled Isofiba layer.
APPLICATION
- To be used over existing floorboards for conversions, refurbishments or new build with a decoupled ceiling
INSTALLATION
- Installation of isocheck should not commence until roof, window glazing and wet trades are completed and the structure is watertight.
- Floor should be a level screed / concrete with a smooth surface, or an in-situ concrete base. The floors should be level, sufficiently dry and swept clean.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Board fitting should begin at the furthest point from the entrance and marked out so as not to finish with any panels less than 200mm wide.
- The decking must be laid in broken bond pattern, with all joints glued and staggered.
- No Mechanical fixings should be used.
- Isocheck adhesive is applied to both the top of the tongue and the bottom of the groove on each side of each joint.
- The boards are then pushed tightly together. Surplus adhesive should be wiped away from the surface with a damp cloth.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Isocheck-28T-24T-18T-15T-Datasheet.pdf
Brand: Isomass
Model: 1litre
Delivery Time: 1 - 2 days
For use with both Isocheck and Econocheck tongued & grooved board joints.As a rule of thumb a 1 litre bottle (as illustrated) should cover approx 20m2 depending on the board size, ensuring glue is always applied to the top and bottom of the t&g joint. ..
£8.89
£10.67 inc VAT
Guide Price
Brand: Isomass
Model: 1000x1200mm - 1.2m2
Delivery Time: 2 - 3 working days
Isocheck Impact Mat 200 is an impact improvement system, designed for reducing impact and airborne sound transmission and improving acoustic performance of timber floor constructions and staircases, ideal for upgrades of stairs and under floor, due to the improved impact sound resistance. ..
Guide Price: £25.89
£31.07 inc VAT
Guide Price
Brand: Isomass
Model: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 days
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 15T is used in new build, refurbishment and conversion applications, able to also reduce impac..
Guide Price: £20.12
£24.14 inc VAT
Brand: Isomass
Model: 26mm - 8.5mm
Delivery Time: 2 - 3 working days
26mm Isocheck Isolation Washers used to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration.Diameter A = 26mmDiameter screw B = 8.5mm..
Brand: Isomass
Model: 25mm x 5mm x 25m - Free Delivery
Delivery Time: 1 - 2 days
25mm x 5mm x 25m Isocheck Acoustic Isolation Strip is utilised to improve acoustic insulation and reduce impact sound transmission in masonry, steel, and timber partition and separating walls. These strips are crafted from cross-linked Isopoli foam and feature an adhesive backing, ensuring they..
£32.55
£39.06 inc VAT
Guide Price
Brand: Isomass
Model: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
28mm Isocheck 28T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 28T is used in new build, refurbishment and conversion applications, able to also reduce impac..
Guide Price: £37.10
£44.52 inc VAT
Related Products
Guide Price
Brand: Isomass
Delivery Time: 999
Delivery Time: 3 - 5 days
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £20.12
£24.14 inc VAT
Guide Price
Brand: Isomass
Delivery Time: 999
Delivery Time: 3 - 5 days
28mm Isocheck 28T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £37.10
£44.52 inc VAT
Brand: Isomass
Delivery Time: 9999
Delivery Time: 3 - 5 days
18mm Isocheck 18T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performa..